We've been looking for a dependable, durable and RV rated bike rack for a reasonable price .. after reading several reviews and purchasing the swagman ..and taking it all around Minnesota ...I can honestly say I'm impressed but the quality and ease of assembly along with the security locks on the lock bars for the individual bikes .. I doubt I will ever need to buy this again ... But if all swagman products are this well manufactured I will definitely look to their products before buying anything in the we might need for our future bike needs.

The rack was very well packed. All the hardware was properly secured. Other than some errors and omissions on the instructions, it was very easy to assemble. The locking pin really locks it in with my travel trailers receiver. And when you replace the snap pin with the supplied RV bolt and nut, it's rock solid. My wife's 60 pound e-bike fits nicely along with my gravel bike.

One thing to note. On my kit, there was a reinforcing gusset that I don't see in earlier assemblies. If I had a rack that was not equipped with this, I'd contact Swagman to see if it's necessary to retrofit older racks. The reinforcing gusset kit is p/n 64714 and comes with the needed hardware and supplemental instructions. But that p/n is not listed on the Swagman website.

It's always concerning when assembling a product to have left over hardware. In this case, they included two different threaded pins for the receiver/hitch shaft interface. On one of them, you can attach a lock that is keyed the same as the hooks on the rack. The other pin simply screws in place and is held with a clip. It would have been nice if the instructions mentioned this.

Overall, it appears to be a robust rack and I hope to get many years of use.

Bought this much more beefy rack when we bought two 49 pound (each) e bikes. Had never heard of Swagman, but based on appearance and excellent customer ratings/reviews, bought it.

Instructions are not great as they contradict illustrations, so be sure to look closely at both. Otherwise, not difficult to assemble.

Nice attachment system to trailer hitch in that there is a screw in pin, that keeps rack from vibrating or shifting.

Tie down system is solid feeling and bikes did not move. Also used on my much lighter Gian hybrid bike and worked perfect.

Inverted "U", shaped locking brackets work well. Use a heavier lock if leaving bikes unattended or overnight as a good criminal could break them, but solid for holding in place while driving or leaving in a very visible area.

I put the shorter locking bracket below the longer one to secure my wives step through frame and it worked fine and I used the other longer one to secure my traditional frame.

Flat black powder coat finish looks and feels pretty hearty.

I'd buy again and recommend!

I have travelled with this bike rack on the back of my fifth wheel for several months. It has worked flawlessly. My eBikes are secured and have very limited movement going down the highway. Since my hitch doesn't protrude from the back of my fifth wheel like an automobile, I have to turn the handle bars on the bike closest to the back of the fifth wheel 90 degrees to be sure it doesn't collide with the trailer. Based on my recommendation, my friend purchased the same hitch that he uses on his pickup truck. He doesn't have to turn the handle bars.

Seems very sturdy compared to the Chinook, which I also own and like a lot for convenience purposes. I got this new rack for my RV trailer but have used it so far on my truck. This model is better for back of an RV, and much less movement while carrying E-Bike on the back of a pickup truck. However, the pin to fold it up against the vehicle is super hard to get in and out. I need to use a hammer. Hopefully it will loosen up. It's also heavier, and sits higher than the Chinook, so it's a bit harder to lift my bike up onto it. I don't use a ramp, which I think would be even more difficult.

I use the wheel cups facing inward to hold the bike in. I like this better/safer than facing them outward. That way the bike sits in the cups almost without holding on, so its easier to bring down the hook and fasten it onto the bike.

The wheel cups are huge - very wide. You could definitely fit fat tires in them. However, my E-Bike does not have giant fat tires, so I would rather have narrower wheel cups to hold the tires more snugly. For the designers, it would be nice if we could choose which cups we want - regular or wide. I used 2 of the narrower ones from my Chinook , and 2 of the fat tires ones, in case I need to transport a friend's fat tire bike.

The rack does not tip outward away from the trunk or tailgate, and when folded up against the vehicle it sits higher than the Chinook. So I cannot open my truck tailgate all the way when this rack is on, either folded up or down. So that's a bummer.

What I like best is the 2" square bar that goes from the hitch receiver to the rack. This is what makes it so stable. The Chinook has a 1 -1/4" bar with a 2" receiver adapter so you can use it on either size hitch receiver, but this makes it sway and wobble more.

We were getting tired of carting our eBikes around in totes in the bed of our truck and started looking for a bike rack that could not only carry our bikes, but also be rated for RV use. The prices are a little eye watering, but the Swagman was relatively low priced and recommended by folks in the RV'ing community. I was immediately impressed when I opened the box at how well it was packed and how everything looked heavy duty. I gave it 5 stars for ease of assembly, but I'm somewhat mechanically inclined. The pictograms in the assembly instructions were pretty easy to follow. I assembled it on the trailer hitch.

I can't help but be impressed by how well built and engineered this rack seems to be. I'm certain that they under-rated its carrying capacity. Seriously, if the hitch on the front of the trailer ever goes bad, I'll just swap ends and pull the trailer with the bike rack. Just kidding (sort of).

This bike carrier works great on the rear of my rv. It’s super easy to set up and has very clear and explicit instructions. If you carry eBikes, you need this bike rack!

Does a great job of keeping our bikes on the back of our rv or truck when we take the bikes on the road. Very sturdy.

This rack is very heavy duty. It will carry 2 bikes up to 80lbs. It’s great for RVs. It’s good on a suv but does not tilt for cargo area access. You also need to buy a tray kit for each fat bike you want to carry. Easy to assemble. It was delivered very promptly. The seller, Modula racks were great!

l’attache remorque est très solide et permet de bien fixer les vélos électriques en toute sécurité. C’est un produit de qualité!

Swagman deserve an award for the packaging of this merchandise. Every component was individually packaged in very sturdy cardboard.

The bike rack works well on the back of our truck, but I have yet to try it on the back of our travel trailer. Hence only 4 stars.

We were looking for a very stable, heavy duty E-bike rack. This fit perfectly. It is well constructed and holds our two e-bikes with ease.

Bien